Next Course Date(s)
This course can be booked throughout the year - click here to book now
Duration : Approximately 3 years
At Tell our approach to the delivery of Scottish Vocational Qualifications (SVQs) is to consult with you, the employer, to ensure that the Personal Training and Development programme suits your business needs and helps to provide you with the competitive edge you need to support your business growth.
Our SVQ at Level 3 in Engineering Maintenance is assessed against a set of national standards and accredited by EMTA Awards Ltd (EAL).
To achieve the SVQ at level 3, the apprentice is required to complete the 4 mandatory units detailed overleaf, and an appropriate number of optional units chosen from the attached summary list. The number of optional units required is dependent upon the pathway chosen by you, the employer.
EMPLOYERS ROLE:
While in the workplace your company will be responsible for providing the apprentice with the appropriate practical skills and knowledge training relating to your business.
You will be required to allow the apprentice to further enhance their training by providing them with the opportunity to apply their learning in practice i.e. undertake maintenance tasks using a variety of methods and equipment.
You will also be required to allow your apprentice access and time to meet with their assessor in the workplace
TELL’S ROLE:
Your apprentice will be supported by a Tell Assessor during 1:1 guidance sessions in the workplace. During the sessions our Assessor will provide or undertake the following:
- Directly observe your apprentice in the workplace undertaking maintenance activities associated with their role
- Produce written observation reports of the tasks undertaken by the apprentice, the skills and knowledge they demonstrated and the national standards met
- Provide guidance and support on the types of naturally generated evidence associated with the apprentice which can be used for their portfolio
- Provide them with guidance and support on the knowledge and understanding they must be able to demonstrate as part of their role, and how this can be gathered i.e. written questions
- Assess evidence produced by the apprentice and advise them if it meets the national standards set and if not, what they must do to generate the evidence required
- Inform the apprentice when units have been achieved
For those apprentices under the age of 20 years, the costs include awarding body registration and certification fees, 1:1 guidance and support sessions, formative and summative assessment, and verification will be met via the governments Modern Apprenticeship programme.
Mandatory Units
The candidate is required to complete the four mandatory assessment routes, plus the required number of assessment routes from their choice of pathway.
- ENM3/001 - Complying with statutory regulations and organisational safety requirements
- ENM3/002 - Using engineering drawings and documents in maintenance activities
- ENM3/003 - Working efficiently and effectively in engineering
- ENM3/004 - Handing over and confirming completion of maintenance activities
Pathways
To be completed in addition to mandatory assessment routes
Pathway EMAA: Mechanical
Group A (the candidate must complete both units)
- ENM3/005 - Carrying out fault diagnosis on mechanical equipment
- ENM3/006 - Maintaining mechanical equipment
Group B (the candidate must complete two units from this list)
- ENM3/007 - Restoring mechanical components to usable condition by repair
- ENM3/008 - Producing replacement components for maintenance activities
- ENM3/009A - Carrying out preventative planned maintenance on mechanical equipment
- ENM3/010 - Carrying out condition monitoring of plant and equipment
- ENM3/080 - Assisting in the installation of mechanical equipment
Pathway EMBA: Electricial
Group A (all assessment routes in this group must be completed)
- ENM3/011 - Carrying out fault diagnosis on electrical equipment and circuits
- ENM3/012 - Maintaining electrical equipment
- ENM3/013 - Modifying or rewiring electrical circuits
Group B (the candidate must complete two assessment routes)
- ENM3/010 - Carrying out condition monitoring of plant and equipment
- ENM3/014 - Testing electrical equipment and circuits
- ENM3/15A - Carrying out preventative planned maintenance on electrical equipment
- ENM3/081 - Assisting in the installation of electrical/electronic equipment
Pathway EMCA: Electronic
The candidate is required to complete all the assessment routes given below
- ENM3/016 - Carrying out fault diagnosis on electronic equipment and circuits
- ENM3/017 - Testing electronic equipment and circuits
- ENM3/018 - Repairing electronic equipment
Pathway EMDA: Fluid Power
Group A (candidate must complete both assessment routes)
- ENM3/019 - Carrying out Faults diagnosis on fluid power equipment and circuits
- ENM3/020 - Maintaining fluid power equipment
Group B (candidate must choose two assessment routes)
- ENM3/010 - Carrying out condition monitoring of plant and equipment
- ENM3/021 - Carrying out planned maintenance activities on fluid power equipment
- ENM3/022 - Testing fluid power equipment and systems
- ENM3/082 - Assisting in the installation of fluid power equipment
Pathway EMEA: Engineered Systems
Group A (candidate must complete this unit)
- ENM3/023 - Carrying out fault diagnosis on engineered systems
Group B (candidate must complete two assessment routes)
- ENM3/024 - Maintaining mechanical equipment within an engineered system
- ENM3/025 - Maintaining electrical equipment within an engineered system
- ENM3/026 - Maintaining Fluid power equipment within an engineered system
- ENM3/027 - Maintaining process controller equipment within an engineered system
Group C (candidate must complete one assessment route)
Pathway EMFA: Services Maintenance
Group A (candidate must complete both assessment routes)
- ENM3/029 - Reading and extracting information from service drawings and specifications
- ENM3/030 - Carrying out fault diagnosis on services and systems
Group B (candidate must complete two assessment routes)
- ENM3/031 - Maintaining fresh water distribution systems and equipment
- ENM3/032 - Maintaining waste/foul water distribution systems and equipment
- ENM3/033 - Maintaining workplace environmental control systems
- ENM3/034 - Maintaining emergency power generation equipment
- ENM3/035 - Maintaining heating and ventilation systems
- ENM3/036 - Maintaining air conditioning and ventilation systems
- ENM3/037 - Maintaining gas distribution systems and equipment
- ENM3/038 - Maintaining compressed air systems and equipment
- ENM3/039 - Maintaining process control systems
- ENM3/040 - Maintaining instrumentation and control systems
- ENM3.041 - Maintaining industrial refrigeration equipment
- ENM3/042 - Maintaining environmental control equipment
- ENM3/072 - Maintaining medical device and surgical instrument decontamination equipment
- ENM3/073 - Maintaining medical gas pipeline systems and equipment
Group C (candidate must complete one assessment route)
- ENM3/010 - Carrying out condition monitoring of plant and equipment
- ENM3/043A - Carrying out preventative planned maintenance on services systems and equipment
- ENM3/084 - Assisting in the installation of engineering services equipment
Pathway EMGA: Lift Servicing
Candidate is required to complete all the assessment routes below
- ENM3/044 - Carrying out fault diagnosis on lifts
- ENM3/045 - Inspecting and servicing lift equipment
- ENM3/046 - Checking Lift function
- ENM3/047 - Rectifying faults in lifts
Pathway EMHA: Lift Repair
The candidate is required to complete all the assessment routes below
- ENM3/044 - Carrying out fault diagnosis on lifts
- ENM3/046 - Checking lift function
- ENM3/047 - Rectifying faults in lifts
- ENM3/048A - Repairing/replacing lift doors, chains, ropes and equipment
Pathway EMIA: Escalator Repair and Service
The candidate is required to complete all the assessment routes below
- ENM3/049 - Carrying out fault diagnosis on escalators
- ENM3/050 - Rectifying faults in escalators
- ENM3/051 - Inspecting and servicing escalators
- ENM3/052 - Testing and reinstating escalator insallation
Pathway EMJA: Communication Electronics
Group A (candidate must complete one assessment route)
- ENM3/016 - Carrying out fault diagnosis on electronic equipment and circuits
- ENM3/053 - Carrying out fault diagnosis on communication electronic systems
Group B (candidate must complete two assessment routes)
- ENM3/017 - Testing electronic equipment and circuits
or but not both
- ENM3/054 - Testing communication electronic systems
- ENM3/018 - Repairing electronic equipment
or but not both
- ENM3/055 - Repairing communication electronic systems
- ENM3/056A - Carrying out preventative planned maintenance on communication electronic systems
- ENM3/057 - Modifying communication electronic systems
- ENM3/058 - Configuring communication electronic systems
- ENM3/059 - Installing communication electronic systems
Pathway EMKA: Servicing Medical Equipment
Group A (candidate must complete all assessment routes)
- ENM3/060 - Carrying out fault diagnosis on medical equipment
- ENM3/061 - Testing medical equipment
- ENM3/062 - Carrying out scheduled servicing on medical equipment
Group B (candidate must complete three assessment routes)
- ENM3/063 - Servicing Cardiovascular equipment
- ENM3/064 - Servicing physiological monitoring and infusion equipment
- ENM3/065 - Servicing anaesthetic and ventilation equipment
- ENM3/066 - Servicing operating theatre and surgical equipment
- ENM3/067 - Servicing medical imaging equipment
- ENM3/068 - Servicing laboratory equipment
- ENM3/069 - Servicing dental equipment
- ENM3/070 - Servicing medical therapeutic equipment
- ENM3/071 - Servicing mechanical and electromechanical assistive technology equipment
Pathway EMLA: Instrumentation and Control
Group A (candidate must complete both assessment routes)
- ENM3/074 - Carrying out fault diagnosis on instrumentation and control equipment and circuits
- ENM3/075 - Maintaining instrumentation and control equipment and circuits
Group B (candidate must complete two assessment routes)
- ENM3/076A - Carrying out preventative planned maintenance on instrumentation and control equipment
- ENM3/077 - Repairing/overhauling instrumentation and control equipment
- ENM3/078 - Testing and calibrating instrumentation control equipment
- ENM3/085 - Assisting in the installation of instrumentation and control equipment
